Appraisal number: 688 (2018)
Date issued: 31 Aug 2018
Quickflash Ready-Made Flashings
Description
Quickflash Ready-Made Flashings are a range of pre-fabricated flashing products designed to meet the flashing requirements of E2/AS1. The flashings are available in Z 450 galvanised steel, AZ 200 Zincalume with factory-applied paint coating, stainless steel or aluminium.
Scope
Quickflash Ready-Made Flashings have been appraised for use as flashings and cavity closers with wall cladding systems on buildings within the following scope:
- The scope limitations of NZBC Acceptable Solution E2/AS1.
- With weatherboard, fibre-cement sheet, external insulation and finishing systems (EIFS), stucco and plywood wall cladding systems complying with NZBC Acceptable Solution E2/AS1 or proprietary cladding systems covered by a valid BRANZ Appraisal.
- Situated in NZS 3604 wind zones up to and including extra high.
Technical literature
- Quickflash brochure (2019)
- Detail folder and detail sheets (2018) 01-06, 08-18, 20-23, 24A, 24B, 25- 30, 32-45, 49-52, 101-108
Consenting instructions
Always refer to the Appraisal in full and the technical literature.
Appraisal holder
Manufacturer details
Address:
Phone:
Web:
Email: