Junctions module: Junction installation for LBPs
Product Description
This module provides an introduction to junction installation for LBPs. It covers what junctions are and why they are important; how water behaves; flashings, penetrations, sealants, and sequencing; what you need to know before you start building; and common issues and problems during installation.
| Publication date | March 2021 |
|---|---|
| Product type | eLearning module |
| Availability | Available |
| Product code | EL038 |
Products you recently viewed
REBRI Resource Recovery All waste: Centralised Sorting and Storage (PDF)
This guide provides good practice advice to maximise recovery rates for all types of construction and demolition (C&D) waste from designated sorting facilities and resource recovery centres.
The aim is to assist the resource recovery industry to provide systems that:
- maximise the amount of C&D waste material diverted from landfill and cleanfill
- minimise contamination and damage of the material
- avoid or minimise environmental and nuisance effects from sorting and storage.
This guideline covers:
- finding good markets for C&D waste
- setting up a waste-sorting and storage facility
- operating a waste-sorting and storage facility
- sorting procedures
- storage
- residual waste disposal
- environmental, health and safety hurdles
- a word on licensing
- resources and contacts
- other guidelines in this series.
Disclaimer: Please note that our publications reflect the regulations and best practices on the date of release, which is shown on the publication. As regulations and industry standards evolve, we always recommend that our publications be read in conjunction with the latest building code clauses and standards.
Module: Measuring moisture content in timber
This module focuses on the concepts and features critical to measuring moisture content of timber in buildings.
Topics covered in this self-paced module:
- Why is it important?
- What do I use to measure moisture?
- How do I take the measurements?
- How do I read the measurements?
- What are common problems?
- Library of useful materials
Gain 100% in the test at the end of the module, and you'll receive a record of your completion that can be submitted as part of your CPD activity log.
Managing earthquake-prone council buildings – a decision framework
This framework is intended for the management of council-owned buildings only. It is not intended to guide a council’s regulatory responsibilities for managing all earthquake-prone buildings in their area in general.
The book was published before the Government’s announcement in September 2025 that it will make changes to the earthquake-prone building system.
Disclaimer: Please note that our publications reflect the regulations and best practices on the date of release, which is shown on the publication. As regulations and industry standards evolve, we always recommend that our publications be read in conjunction with the latest building code clauses and standards.
Webinar: The Carbon Challenge - Design and build a low-carbon building
We look at practical solutions to reducing a building’s carbon footprint.
Please note: that access to this webstream will expire after 1 month.
Stairs Module: Introduction to Stair Design
This module provides an introduction to stairway design following D1/AS1 including specifications and features that are required for safety and ease of use.
REBRI Easy Guide to C&D Resource Recovery: Plasterboard (PDF)
Two pages of the best tips from the REBRI Guide to C&D Resource Recovery series on plasterboard.
Features:
- What is waste plasterboard good for?
- What’s involved?
- Some things to think about
- Examples from those out there doing it
Disclaimer: Please note that our publications reflect the regulations and best practices on the date of release, which is shown on the publication. As regulations and industry standards evolve, we always recommend that our publications be read in conjunction with the latest building code clauses and standards.