Webinar: H1 - Windows, doors and skylights

This webinar provides a basic introduction to using the BRANZ building Life Cycle Assessment tool, LCAQuick. It builds on the Life Cycle Assessment webinar by providing a practical demonstration of LCAQuick, going over the basic inputs and outputs of the tool.

Please note: that access to this webstream will expire after 1 month.

• Understand Government carbon reporting requirements

• Learn how carbon assessments can aid decision making at different stages of design.

• Understand the process for the carbon assessment trials

Please note: that access to this webstream will expire after 1 month

The art deco house of the 1930s was a dramatic change to the earlier villa and bungalow. A flat roof, stucco cladding, rounded corners and reduced decoration all contributed to art deco's distinctive style.

These houses are often bought for their style rather than performance. Their stucco cladding and very low-pitched roofs often had weathertightness problems, and without renovation, art deco houses can be cold to live in. Careful renovation can retain the popular style while improving performance and comfort.

This book covers:

• what defines art deco style
• how these houses were constructed, and with what materials
• typical modifications they have had in the decades since they were built
• problems that may be encountered and suggested remedies
• how to get a consent for renovation work, looking at compliance paths and Alternative Solutions
• project and construction planning.

General wear and tear in a house often results in damage to interior wall linings. Damage can range from repairable (a picture hook pulled out or a door handle through the wall) to the catastrophic (a major leak or structural failure). 

This Good Repair Guide outlines some options for repairing existing wall linings and guidelines for when to replace a sheet or larger area of lining.

Prefinished linings (such as melamine-faced boards) are not included in this guide.

This seminar travels along the path of timber as it is prepared for a career in the building industry. Starting off in the forest, we will explore the influences on the timber as it grows and how this will impact on its properties as sawn timber. Once felled, the timber starts its processing journey where it is again subject to many influences.

Once in its sawn forms, framing and wall cladding, we will then traverse the treatment options for the end use, drying, storage (during transport and on site), installation and post-installation care. For timber weatherboard claddings, we will cover the requirements for a good installation including storage and transport, defects, suitable species, treatment, applicable codes and standards, installation and fixing, as well as appropriate coatings for the treatment and finally maintenance.

Please note that access to this webstream will expire 1 month after purchase.

Over 279,000 houses were built in New Zealand in the 1970s, a time of expanding suburban development. Architectural styles developed during the 1950s and 1960s influenced mass housing, and a wide range of new materials was used. Split-level homes became common on sloping sites, and many houses included garaging for two cars, with internal access. Architect-designed houses introduced different window styles and rooflines as well as new linings and claddings.

Many houses from this era are little changed since construction. Typical renovation work includes updating kitchens and bathrooms and making improvements to energy efficiency through retrofitting thermal insulation and installing modern space heating systems.

This technical resource covers:

• exactly what defines 1970s style
• how these houses were constructed and with what materials
• modifications they may have had in the decades since they were built
• typical problems and suggested remedies.

This book also takes you through the issue of getting a consent for renovation work, looking at compliance paths and Alternative Solutions.