BRANZ House Insulation Guide 6th edition v2.6 MAC (1 August 2025)
Product Description
This Microsoft Excel (.xlxs) 25MB download of BRANZ House Insulation Guide 6th edition is for MAC users.
Updates:
- A new 'Summary' sheet has been added to the tool
- An error has been repaired where the R-value for plain slab floors was higher than it should have been when adding floor topper insulation
- Improvements to the 'Correction for reduced perimeter insulation' section of the 'Roof spaces' sheet
The guide is now in two parts:
- The tables of construction R-values for common construction options for compliance under H1/AS1 and H1/VM1 5th edition
- The accompanying House Insulation Guide text [PDF] for guidance on insulation to meet or exceed H1 AS/1 and H1/VM1 5th edition.
| Publication date | 1 August 2025 |
|---|---|
| Product type | Download |
| Availability | Available |
| Product code | HIG_MAC |
Products you recently viewed
Webinar: H1 - Calculation method
The webinar covers:
- What the H1 Calculation method is and when to use it
- Reference houses and how these are calculated
- The advantages, disadvantages and limitations of the calculation method
- Tricks + tips how to make it useful
- How to use and verify the output.
- Please note:Â that access to this webstream will expire after 1 month.
Seminar: Building science at work
This seminar provides an insight into how BRANZ research priorities are determined as well completed research, research for coming year, National Science Challenges and overseas research.
Please note that access to this recorded seminar will expire 1 month after purchase.
Webinar: Plumbing and Drainage Design - Code changes
- G12 Water supplies –changes to temperature, lead in plumbing and water system - components and many more
- G13 Foul water – gully dishes, junctions in graded pipes
- AS/NZS 3500 – water services, clearances, junctions, marking pipework and heated circulatory systems, rainfall intensity and preformed slumps
- Hydraulics and water flow through plumbing systems
- Heat transfer – including insulation and energy efficiency
- Foul water fundamentals – gravity, ventilation, friction and velocity
- Materials – expansion, contraction, corrosion and durability.
Designing for maintenance
Buildings are complicated. As part of the design process, the building designer must balance a range of potentially conflicting considerations such as:
- client (owner/developer) attitudes to costs and maintenanceÂ
- material and finish costs
- material and finish performance
- equipment cost and performance
- environmental conditions, both internal and external
- maintenance requirements and associated costs for the materials/components selected
- complexity of design and detailing
- aesthetics
- access
- the expected refurbishment cycles for the building
- building use and potential changes in use during its life
- potential changes in available technology
- safety.
Design and construction quality can also have a significant impact on the life expectancy of a building's materials and components as well as on the maintenance and renewal requirements.
The aim of this book is to outline maintenance issues that should be considered as part of the design process so that completed buildings are able to be effectively and economically maintained.
Webinar: Carbon assessment trials - Lessons learnt
Identify the key outputs/learnings from the Carbon Assessment Trials.
Please note: that access to this webstream will expire after 1 month