Skip to main content

Appraisal number: 445 (2022)

Date issued: 8 Apr 2022

MPT Meshclad EIFS Cladding System

Description

The MPT Meshclad EIFS Cavity System is a cavity-based Exterior Insulation and Finishing System (EIFS) wall cladding. It is designed to be used as an external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The system consists of expanded polystyrene (EPS) sheets fixed over polystyrene battens to form the cavity. The coating system consists of 5-10 mm thickness of fibreglass mesh reinforced plaster, which is finished with an elastomeric or high build paint system. The plaster finish can be applied to give different texture appearances.

Technical literature

Architectural Details - Version 2, 02.16

  • Enclosed Deck Balustrade to Wall Junction
  • Corner - External Corner Junction to Brick
  • Corner - External Round Corner
  • Corner - External Square
  • Corner - Internal Corner Junction to Brick
  • Corner - Internal Square
  • Foundation - Timber Floor
  • Foundation - Bottom Plate Base Layout
  • Joint - Horizontal Expansion Joint - 2 storeys or less
  • Joint - Inter-Storey Drained Greater than 2 storeys
  • Joint - Vertical Expansion Joint
  • Joint - Vertical Expansion Joint
  • Joint - Vertical Expansion Joint
  • Junction
  • Junction
  • Junction - Parapet Balustrade Wall Timber Framing
  • Junction - Parapet Balustrade Wall Batten Layout
  • Junction - Parapet Balustrade Wall Primary Flashing
  • Junction - Parapet Balustrade Wall Secondary Flashing
  • Junction - Parapet Balustrade Wall Secondary Flashing
  • External Corner Weatherboard Junction
  • Parapet - Flat
  • Parapet - Sloping Metal
  • Plastered Capping to Parapets or Balustrades W/C Handrail
  • Plastered capping to parapets or balustrades
  • Roof - Wall Junction
  • Soffit - Edge Detail
  • Soffit - Flush Eaves Gutter
  • Soffit - Horizontal Detail
  • Soffit - Reverse Sloped Soffit - Option 1
  • Soffit - Reverse Sloped Soffit - Option 2
  • Meshclad Overlap to Masonry
  • Junction - Stopend flashing - Roof to Wall
  • Wall - Batten Layout Around Windows
  • Wall - Fixing Blocks For Down Pipes Etc.
  • Wall - Framing Layout Timber Framing With Battens
  • Wall - Cantilevered Joists Detail 40mm
  • Wall - Typical Meterbox Installation
  • Wall - Meterbox 3D View
  • Wall - Meterbox Wall Section
  • Wall - Pipe Penetration
  • Wall - Typical Pipe Penetration
  • Wall - Plate Pergola - Deck
  • Junction - Window Head to Jamb - Preparation
  • Junction - Window Head to Jamb
  • Window - Aluminium Head Detail
  • Window - Aluminium Jamb Detail
  • Window - Aluminium Sill Detail
  • Window - Sill Trim - Bottom Corner Detail

Consenting instructions

Always refer the the Appraisal in full and the technical literature.

Appraisal holder

Petros Holdings Ltd T/A Mineral Plaster Technology
Address: 61 Hillside Road, Wairau Valley, Auckland 0627
Phone: 09 447 3918
Email:

Manufacturer details

Address:
Phone:
Web:
Email: