Skip to main content

Appraisal number: 998 (2018)

Date issued: 22 Nov 2018

Resene Construction Systems Masonry Render System

Description

The Resene Construction Systems Masonry Render System is a reinforced solid plaster system for use as a finishing system over substrates of concrete masonry, clay brick veneer and in situ or precast reinforced concrete.

The coating system consists of a minimum 5 mm thickness of fibreglass mesh reinforced polymer-modified plasters and high-build, tintable finishing plasters. The plaster is finished with a tintable protective finishing coat. The plaster can be applied to achieve different textured appearances.

The system incorporates Resene Construction Systems EdgeSeal joinery flashings.

Scope

The Resene Construction Systems Masonry Render System has been appraised as an exterior solid plaster finishing system for buildings within the following scope:

  • With substrates of concrete masonry, in situ or precast concrete up to 3 storeys with a maximum height from ground to eaves of 10 m.
  • With substrates of clay brick veneer designed and constructed in accordance of NZBC Acceptable Solution E2/AS1, NZS 4210 and NZS 4229.
  • With floor plan area limited only by seismic and structural control joints.
  • With supporting structures designed and constructed in accordance with the NZBC.
  • Situated in NZS 3604 wind zones up to and including extra high.

The Resene Construction Systems Masonry Render System has also been appraised for bond, durability and weathertightness of the plaster system for concrete masonry, in situ or precast concrete buildings subject to specific design with no building height or wind exposure restriction.

Technical literature

Resene Construction Systems Masonry Render System details (all dated 1 November 2017)

Blockwork

  • 50.01.10 Wall Section
  • 50.01.20 Isometric
  • 50.01.30 Stairs Waterproofing
  • 50.01.40 Window Isometric
  • 50.02.00 Foundation
  • 50.02.01 Block Foundation (Plastered)
  • 50.02.02 Block Foundation (Plastered and Retaining)
  • 50.02.03 Block Foundation with Pressure Bar
  • 50.02.04 Block Foundation Insulated
  • 50.02.05 Block Foundation on top of Floor Slab
  • 50.03.00 External Corner
  • 50.03.10 External Corner with Weatherboard
  • 50.03.90 External Corner with Aluminium Composite Panel
  • 50.04.00 Internal Corner
  • 50.04.10 Internal Corner with Weatherboard
  • 50.04.90 Internal Corner with Aluminium Composite Panel
  • 50.05.00 Window Sill
  • 50.05.01 Window Sill with Moulding
  • 50.05.60 Door Sill
  • 50.06.00 Window Jamb - Option 1
  • 50.06.01 Window Jamb - Option 2
  • 50.06.02 Window Jamb - Option 3
  • 50.06.05 Window Jamb with Moulding
  • 50.07.00 Window Head
  • 50.07.01 Window Head with Moulding
  • 50.07.02 Window Head (Vented)
  • 50.08.00 Soffit
  • 50.08.30 Raking Soffit - Option 1
  • 50.08.31 Raking Soffit - Option 2
  • 50.08.40 Face Fixed Fascia
  • 50.08.41 Face Fixed Fascia - Membrane Roof
  • 50.09.01 Roof Apron with Poly
  • 50.08.50 Barge with Overhang
  • 50.09.00 Roof Apron
  • 50.09.10 Decking Membrane
  • 50.10.00 Vertical Control Joint
  • 50.10.10 Vertical Junction with Fibre Cement Sheet
  • 50.11.00 Block Mid-Floor
  • 50.11.10 Horizontal Junction with Weatherboard Above
  • 50.11.90 Horizontal Junction with Aluminium Composite Panel
  • 50.12.10 Meter Box Penetration
  • 50.12.20 Pipe Penetration
  • 50.12.21 Fan Vent
  • 50.12.40 Mid-Wall Moulding
  • 50.13.00 Maintainable Balustrade
  • 50.13.10 Metal Parapet - Option 1
  • 50.13.11 Metal Parapet - Option 2
  • 50.13.21 Saddle Detail
  • 50.14.00 Deck Clearance
  • 50.14.02 Deck Drainage - Rainwater Head
  • 50.14.10 Parallel Roof with Hidden Gutter

PC panel

  • 53.02.00 Foundation
  • 53.03.00 External Corner
  • 53.04.00 Internal Corner
  • 53.05.00 Window Sill
  • 53.06.00 Window Jamb
  • 53.07.00 Window Head
  • 53.07.01 Window Head with Moulding
  • 53.08.00 Soffit
  • 53.09.00 Roof Apron
  • 53.10.00 Vertical Joint - Option 1
  • 53.10.01 Vertical Joint - Option 2
  • 53.10.02 Vertical Joint - Option 3
  • 53.13.00 Maintainable Parapet
  • 53.13.10 Metal Parapet
  • 53.14.00 Deck Detail

Brick

  • 51.02.00 Foundation - Option 1
  • 51.02.01 Foundation - Option 2
  • 51.03.00 External Corner
  • 51.04.00 Internal Corner
  • 51.05.00 Window Sill
  • 51.05.01 Window Sill (No Ledge)
  • 51.06.00 Window Jamb
  • 51.07.00 Window Head - Option 1
  • 51.07.01 Window Head - Option 2
  • 51.07.02 Window Head - Option 3
  • 51.07.10 Garage Door Head
  • 51.08.00 Soffit - Perpend Ventilation
  • 51.08.01 Soffit - Vented
  • 51.10.00 Vertical Control Joint

Consenting instructions

Always refer to the Appraisal in full and the technical literature.

Appraisal holder

Rockcote Resene Ltd T/A Resene Construction Systems
Address:
Phone: 03 338 6328
Email:

Marketer details

Address:
Phone:
Web:
Email: