Skip to main content

Appraisal number: 932 (2017)

Date issued: 11 Aug 2017

Building King Building Seal

Description

Building King Building Seal is a wall cladding pipe and services penetration seal consisting of an elastic EPDM sleeve fitted with a self-adhesive flange.

Scope

Building King Building Seal has been appraised for use as a pipe and services penetration seal for use where the pipe and services penetration penetrates the wall underlay on timber-framed buildings within the following scope:

  • The scope limitations of NZBC Acceptable Solution E2/AS1 paragraph 1.1.
  • With BRANZ appraised flexible and rigid wall underlays.
  • Situated in NZS 3604 wind zones up to and including extra high.

Building King Building Seal has been appraised for use as a pipe and services penetration seal for use where the pipe and services penetration penetrates the wall underlay on steel-framed buildings within the following scope:

  • The scope limitations of NZBC Acceptable Solution E2/AS1 paragraph 1.1 with regards to building height and floor plan area.
  • With BRANZ appraised flexible and rigid wall underlays.
  • Situated in NZS 3604 wind zones up to and including extra high.

Building King Building Seal has also been appraised for use on buildings subject to specific weathertightness design. Building designers are responsible for the building design and for the incorporation of Building King Building Seal into their design in accordance with the declared properties and the instructions of Building King Ltd.

Technical literature

Building King Building Seal, version 1, 27 April 2017

Consenting instructions

Always refer to the Appraisal in full and the technical literature.

Appraisal holder

Building King Ltd
Address:
Phone: 06 34 44 650

Marketer details

Address:
Phone:
Web:
Email: