Appraisal number: 866 (2019)
Date issued: 14 Jun 2019
Laticrete Hydro Ban® Interior Waterproofing Membrane
Laticrete Hydro Ban® is a liquid-applied waterproofing membrane for use under ceramic or stone tile finishes in internal wet areas.
Laticrete Hydro Ban® has been appraised for use as a waterproofing membrane for internal wet areas of buildings within the following scope:
- On floor substrates of concrete, plywood, compressed fibre-cement sheet and fibre-cement sheet tile underlay and on wall substrates of concrete, concrete masonry, wet area fibre-cement sheet lining systems and wet area plasterboard lining systems.
- When protected from physical damage by ceramic or stone tile finishes.
- Where floors are designed and constructed such that deflections do not exceed 1/360th of the span.
The use of Laticrete Hydro Ban® on concrete slabs where hydrostatic or vapour pressure is present has not been assessed by BRANZ and is outside the scope of this Appraisal.
Movement and control joints in the substrate must be carried through to the tile finish. The design and construction of the substrate and movement and control joints is specific to each building and therefore the responsibility of the building designer and building contractor. These joints have not been assessed by BRANZ and are outside the scope of this Appraisal.
Ceramic or stone tile finishes are outside the scope of this Appraisal.
The membrane must be installed by Global Tile Ltd trained and approved applicators.
Laticrete Hydro Ban Waterproofing and Crack Isolation Membrane installation Training Manual, 09/2012/Version 1
Always refer to the Appraisal in full and the technical literature.