Skip to main content

Appraisal number: 861 (2019)

Date issued: 13 Aug 2019

Kirin Insulated Panel System - Internal Partitions and Ceilings

Description

The Kirin Insulated Panel System is for use as internal partitions and ceilings. The system incorporates Kirin Insulated Panels, which are sandwich panels fabricated by injecting polyisocyanurate (PIR) foam between coil-coated steel or stainless steel faces.

Kirin Insulated Panels come in thicknesses ranging from 50 to 200 mm, widths of 1000 mm and lengths of up to 11.85 m. Several different options are available for the exposed surface finish of the steel, including both profile and colour.

Scope

The Kirin Insulated Panel System has been appraised for use as non-loadbearing internal partition and ceiling systems for buildings within the following scope:

  • Buildings of importance level 1 to 5 as described by AS/NZS 1170, except that housing and communal residential buildings are excluded.
  • Constructed with concrete framing complying with NZS 3101 or steel framing complying with NZS 3404.

The Kirin Insulated Panel System has not been assessed for use where fire rated partitions and ceilings are required.

The structural, fire and thermal design of the Kirin Insulated Panel System for each specific structure is the responsibility of the building designer.

The installation of the Kirin Insulated Panel System is to be carried out by installers trained by Kirin Insulated Panels New Zealand Ltd.

Technical literature

  • CS-PC701 Cold Store Partition & Ceiling Joint Detail, 16 October 2012
  • CS-PB702 Cold Store Partition Base Detail, 16 October 2012
  • CS-WC703 Cold Store Wall to ceiling Joint detail, 16 October 2012
  • CS-WC704 Cold Store Wall Corner Joint Detail, 16 October 2012
  • FCS-PC705 Freezer & Cold Store Partition & Ceiling Detail, 16 October 2012
  • F-WC 704 Freezer Wall to Ceiling Joint Detail, 16 October 2012
  • F-PC-701 Freezer Partition & Ceiling joint Detail, 16 October 2012
  • F-FW- 702 Freezer Floor and Wall Joint Detail, 16 October 2012
  • CR-CP701 Clean Room Ceiling & Partition Joint Detail, 16 October 2012
  • CR-CP702 Clean Room Ceiling & Partition Joint Detail, 16 October 2012
  • CR-CP701 Clean Room Ceiling & Partition Joint Detail, 16 October 2012
  • CR-CS703 Clean Room Ceiling Suspension Detail, 16 October 2012
  • CR-CS704 Clean Room Ceiling Suspension Detail, 16 October 2012
  • CR-CS705 Clean Room Ceiling Suspension Detail, 16 October 2012
  • CR-CS706 Clean Room Ceiling Suspension Detail, 16 October 2012
  • CR-CW707 Clean Room Ceiling & wall joint Detail, 16 October 2012
  • CR-DD708 Clean Room Double Panel Door Detail, 16 October 2012
  • CR-50DD709 Clean Room Double Panel Door Detail, 16 October 2012
  • CR-P710 Clean Room Partition Detail, 16 October 2012
  • CR-PB711 Clean Room Partition Base Detail, 16 October 2012
  • CR- PB712 Clean Room Partition Base Detail, 16 October 2012
  • CR-PB713 Clean Room Partition Base Detail, 16 October 2012
  • CR-SD714 Clean Room Single Panel Door Detail, 16 October 2012
  • CR-50SD715 Clean Room Single Panel Door Detail, 16 October 2012
  • CR-VC716 Clean Room Vertical Corner Detail, 16 October 2012
  • CR-VC717 Clean Room Vertical Corner Detail, 16 October 2012

Consenting instructions

Always refer to the Appraisal in full and the technical literature.

Appraisal holder

Kirin Insulated Panels New Zealand Ltd
Address:
Phone: (09) 950 6768

Marketer details

Address:
Phone:
Web:
Email: