Viking Peel and Stick Membrane

Viking Peel and Stick Membrane is a self-adhesive damp-proof membrane for basement retaining walls and floors.

Viking Peel and Stick Membrane has been appraised as a DPM for use:

• on buildings subject to non-specific design under floor slabs complying with NZS 3604 and behind concrete masonry basement walls and under floor slabs complying with NZS 4229
• on buildings subject to specific design with substrates of in situ or precast concrete complying with NZS 3101 or concrete masonry complying with NZS 4230 and 4210
• where subsoil drainage and free-draining granular backfill has been placed behind basement walls.

Viking Peel and Stick Membrane must be adequately protected against damage during backfilling and in service.

The product must be installed by Viking Roofspec approved applicators.

• Peel and Stick Tanking: PST01 Footing Junction, 4/2/2015
• Peel and Stick Tanking: PST01A Footing Junction, 4/2/2015
• Peel and Stick Tanking: PST02 External Corner, 4/2/2015
• Peel and Stick Tanking: PST03 Internal Corner, 4/2/2015
• Peel and Stick Tanking: PST04 Control Joint, 4/2/2015
• Peel and Stick Tanking: PST05 Chase Flashing Termination, 4/2/2015
• Peel and Stick Tanking: PST06 Pressure Bar Termination, 4/2/2015
• Peel and Stick Tanking: PST07 Tanked Wall/ Roof-Deck Junction, 4/2/2015

Always refer to the Appraisal in full and the technical literature.