Appraisal number: 565 (2016)
Date issued: 22 Dec 2016
Paslode Stud/Plate Connection
The Paslode Stud/Plate Connection is a timber stud to plate joint using power-driven nails as prescribed in Table 8.19 of NZS 3604.
The connection incorporates the use of 90 x 3.15 mm power-driven Paslode nails.
The Paslode Stud/Plate Connection has been appraised for use as a connection detail in buildings within the following scope:
- Buildings within the scope of section 1.1 of NZS 3604.
- With a maximum stud height from the bottom of the bottom plate to the top of the top plate of 2.7 m.
Always refer to the Appraisal in full and the technical literature.